Oakley Motorsports

Specialty Fasteners

Altronics Inc

FTI Converters

Bracket Talk
Classifieds
DragRaceResults
Racer Profile Login
1320go.com
RacerSavings.com
ThisIsBracketRacing.com
Weather Report
Yahoo Maps
Business Directory
Live Timing Directory
Racer Directory
Track Directory
Million Dollar Race
Big Buck Races
Article Archive
Article Search
"On the Road" with Luke Bogacki
Safety First
Tech Talk

FTI Performance is at it Again With New Light Weight High Gear Products for Powerglide Racing Transmsissions
7/26/2017
Deland, FL
Share |




fti performance transmissions logo

Purchase the following Powerglide High Gear Parts HERE

Here at FTI we are always striving to set new standards in the performance transmission industry. With some newly incorporated and innovative design strategies taking place, we are proud to announce the release of our all new FTI light weight Powerglide direct replacement drum and drum kit. This new design fits perfectly in place of a factory Powerglide drum while carrying a larger 8-friction clutch pack. Not only does FTI’s new direct drum allow builders to no longer rely on the factory drums they are forced to work with, but it also offers a 17 percent reduction in rotating weight over the factory drum, equating to over 4 pounds in dead weight. Improving the direct drum even further, FTI was able to match the pre-existing strength and integrity that so many have come to trust our drums for. Furthermore, FTI has made all of these changes and improvements at no expense to you! This new design will be taking the place of the existing design and will retain the existing part # F2529.

fti powerglide high gear drum  fti powerglide high gear drum

Building on top of the improvements listed above, not only did we improve the drum, but we have also made changes to the billet steel clutch hub within as well. With so many different performance clutch hubs out there today, we wanted to make sure clutch hub fitment and sizing were perfect, eliminating any potential issues with mix matched parts such as premature failure due to a clutch “falling off the edge of the hub” when running 8 clutch configurations. Solving problems such as this one, we have incorporated several design changes including the pressure angles and length of the hub. FTI also corrected the head thickness to ensure proper clutch hub endplay within the drum. This new design will be superseding FTI’s existing billet clutch hub part # F2543.

fti high gear powrglide hub  fti powerglide high gear hub

When it comes to the common 1,000 plus HP race cars that we have today, it’s hard to make sense of cutting a 40-year-old cast aluminum part for use in a modern high-performance transmission, especially with the technology we hold at our finger tips today. Well FTI has the cure to this ever-troublesome deed of modifying and cutting these 40-year-old factory pistons. While not new to the market, FTI’s billet aluminum piston is manufactured in house and offers a direct drop-in replacement to the factory piston that is already sized and ready to accept an eight-clutch configuration. Part # F2523P8.

fti powrglide high gear drum piston  fti powerglide high gear drum piston

 

Offering the ultimate direct drum package, FTI has assembled all of these great pieces into an all-in one, ready to install package complete with 060 red race material clutches and new performance steels. Each assembled drum is hand built, hydraulically checked, and clearance'd before ever leaving FTI, making this drum ready for installation the minute you receive it. Topping off the kit, each drum includes a new heavy-duty spring retainer, heavy-duty retainer snap ring, HD flange plate retainer, and new performance springs inside a new FTI light weight direct drum, FTI billet piston, and a new FTI billet steel clutch hub. For the 8 clutch, complete drum see part # F2530.

fti powerglide transmission high gear clutch drum assembly

Purchase the following Powerglide High Gear Parts HERE

< < back > >


Information: scott@dragraceresults.com 208-739-2852
Information: nicole@dragraceresults.com
Advertisement: scott@dragraceresults.com
News & Info: news@dragraceresults.com

Site Design by the DragRaceResults.Com network

All material found on this site is ©1998 - 2019.
No reproduction of any kind is permitted
without the expressed written permission of DragRaceResults.com


Altronics Inc

Moroso

Brodix Cylinder Heads

Steve Schmidt Racing Engines

American Race Cars

Fab Shop Headers

JEGS

FTI Converters

KB Carbs

Autometer

Quick Performance

JEGS